1, every day to do all the guide surface clean lubrication, automatic lubrication system machine should check and clean the automatic lubrication system regularly, check oil quantity, add lubricating oil in time, check the oil pump to start the oil and stop;
2, check whether the automatic lubrication system of the spindle box works normally every day and replace the lubricating oil of the spindle box regularly.
3, pay attention to check whether the cooling fan in the electrical cabinet is working properly, whether there is any blockage in the filter screen, and clean the dust that is attached to it.
4, pay attention to check the cooling system, check the liquid level, add oil or water in time, replace the oil and water when cleaning.
5, pay attention to check the spindle drive belt, adjust the degree of tightness;
6, pay attention to check the degree of tightness of guide rail and adjust clearance.
7, pay attention to check the abnormal noise of the oil pump of the hydraulic system of the machine hydraulic system, whether the height of the oil surface is suitable, the pressure gauge is normal, and the leakage of the pipe and the joint.
8, pay attention to check whether the guideway and machine shield are complete and effective.
9, pay attention to check the mechanical accuracy of all moving parts, reduce the shape and position deviation.
10. Do a good job of cleaning the stainless steel wire bender every day after work, cleaning iron scraps, wiping the cooling liquid of the static guide rail parts, to prevent the guide rail from rusting.
